Controlled Area Network Board

Controlled Area Network Board








High- can is chanel one




Low- can is channel two

if you cant see it well then click on the picture so u can see more clear.


The language and relatinship talks

can low is being pulled down about 2.4vs

can high is being pulled up about 2.5vs by the voltmeter



Right indicator


this is a right indicator you can see the wavform flowing .The starting is of the height is long and the width is short atfer two of thoses then it goes from hieght long and width long.

Left Inicator

The starting is of the width of thick then it goes to height long and width is thick atfer that it goes height long and wiThis is a Left indicator you can see the wavform flowingdth is short and carrys on it bit differnt to the right indicator

Rear Wiper


This is a Rear Wiper you can see the wavform flowing .The starting is of the width short and the height is long and next is long height but the width is thick atfer that is height is long and the width is short it carry on the waveform relationship talks

Stoplights

This is a Stoplight you can see the wavform going up and down. you can see from the starting it all squeeze then goes from height is long and the width is thick could be long. that how a stoplight relationship works.

Fuel Pump

This is a Fuel Pump you can see the wavform. You can see the hieght it long and the width is short it reapeat once then it a big one so the height is long and the widith is thick and after that is long hieght and the width is short.

Reverse Light

This is a Fuel Pump you can see the wavform from the start it a half side then it goes hieght is long and the width is short then carry goes 2 the bottom then next one is the hieght is long and the width is thick or long then the next one is long hieght and short width.

CAN board idenfity for right hand indicator and rear wipers

sorry sir i forgot to the take wire daigam well i wil use differnt wiring diagram for the right hand incicator and rear wipers

click on this http://arrc.epnet.com.libproxy.unitec.ac.nz/autoasp/framerq.asp

the rear wipe wire colour is blue and red

the switch off is blue and white to brown wire

the switch on blue wire

the pin is 1 and 3

the relay is the level switch